All You Need to Know About Wet Sanding Drywall

0

When you’re planning to come up with home renovation projects for the average household, home buyers think of starting with affordable projects. In terms of home repairs, it’s important to consider the interior and the exteriors equally. Though it’s easy to install and repair, drywall requires fairly enough sanding.

It lowers the chance of projecting lumpy walls with visible creases but that action inevitably creates dust that flies everywhere and gets into everything. This is the simple reason to understand why the DIYers don’t often go for sanding drywall projects. To keep your eyes and lungs free from the awful dust, you need to put your hands on the effective solution of wet sanding drywall. Trying this method is worth it because it reduces the dust output to zero.

Kickstart with the Process of Drywall Sanding

Living room with round sofa and table with wide windows with a beautiful view
Used with permission of Leo Designs CHICAGO

Are you aware of the dustless drywall sanding? You need to perform this task after hanging drywall sheets or by spreading the joint compound.

Follow the guide that will teach you the smart hack of how to wet sand drywall. You will be able to learn of what-to-do and what-not-to-do to achieve flawless results in accomplishing wet sanding. This work is typically done with the use of a sponge or an electric sander.

Read on for pro tips to wet sand drywall 

So, before switching to the solution of wet-sanding drywall, let’s know a little more about it. This process involves using a damp sponge to remove the excess taping compound after it gets dried. The moistening process with the sponge is much easier to do to smooth out the drywall. The action is carried out so that the drywall compound starts to loosen and dissolve. If you are new to the concept, you should know that the users need to use a very thick, stiff sponge for wet-sanding.

Let’s check out the instructions favorable for sanding drywall.

Wet Your Sponge

To begin with the process, the user has to fill a bucket with warm water. Followed by this step, you have to wring the sponge really well but noticeably it should be left dry. Be careful of dampening the sponge so that it becomes easy to dissolve and loosen the hardened joint compound. Focus on the selection of the sponge type that will make your task much easier. S Instead of the natural sponge, try to use an artificial, large, and stiff household sponge.

Use the Abrasive Side of Sponge to Sand Out Joints

Kitchen, dining table with chairs and coffee table
Used with permission of Leo Designs CHICAGO

Obviously, you will notice some highly spotted areas in the walls and you need to get rid of those with the abrasive side of your sponge. Master the art of moving the sponge in the right way so that you can avoid depressions in the joint compound. Pay attention to the spiky areas and the high ridges of the dried compound. To do it perfectly, you need to move the sponge in a circular fashion with broad strokes. This process takes more time than dry-sanding. To obtain accurate results, you have to repeat the process with a newly dampened sponge.

Smart Tips to Follow

Along with carrying out the effective instructions on dustless drywall sanding, keep an eye on the below smart tips to get more on what you want to do.

Manage Abundant Source of Water

If you’re sure to follow the process of wet sanding, you need to keep a good arrangement for plenty of water. Your objective is to soften the drywall mud for which you need to fill a five-gallon bucket with three quarters of the warm water. It will help you to avoid refilling your bucket too often.

Rewet and Rinse the Sponge

Chair with furry seat and cabinet with picture above it
Used with permission of Leo Designs CHICAGO

Don’t allow yourself to stop from doing a little bit more to gain the finished appearance of your drywall. As your work progresses, you will find that the sponge will start collecting mud out of the drywall. To avoid imperfections, you need to rinse the sponge thoroughly in the water bucket. Surprisingly, it will leave the result of removing the excess water from the sponge and you can get back to your task once you’re done.

Change the Water Periodically

After several rinses of the sponge, you will notice that the water in the bucket turns to be thick and milky. To sponge with clean water, you have to refill the bucket with water. While pouring the water down the sink, you have to be careful. Also, to prevent any build-up in the pipes, you need to flush with hot water.

The Bottom Line

Start making your task pretty simple while adopting the stated wet sanding drywall procedures. If you are a beginner, try to follow the suggested guidelines for preventing dust. So, next time, you will not step back from the application of this particular process. Research on it well before you start the process. To save your eyes, lungs, and ears, this process is much safer to perform when compared to dry sanding drywall. Thanks to housedecorationtip.com for consulting.

LEAVE A REPLY

This site uses Akismet to reduce spam. Learn how your comment data is processed.