In the past few years, the hot water system industry has undergone many developments, thanks to new technologies and efficiency mandates. However, this makes choosing the right type of hot water system a challenge.
To get a fair idea of the types of water heater and to shoes the suitable one, check expert websites like www.samedayhotwaterservice.com.au. Hot water systems have a significant impact on your household expenses and account for a significant part of your home’s annual energy costs.
If you are about to buy a new water heater for your home or workplace, you must think about certain needs and requirements. Here are a few basic factors which you have to consider before you buy a hot water system.
Type Of Fuel
Commonly, residential hot water systems run on electricity and gas. If you want to replace your old water heater, then check the fuel source of the current system. It is better to buy a new one which runs on the same fuel source.
Gas water heaters require a large amount of investment in the initial stages as it requires special ventilation for safety and health. But they have a low operating cost. Comparatively, the initial cost for electric hot water systems is less, but it has a higher operating cost.
used with permission from AGK Design Studio
Type Of Storage
One of the other common questions is what type of storage to choose? This solely depends on your budget and lifestyle. A storage water heater or a tank water heater is the most popular traditional model. In this type, the hot water is stored in tanks where it is stored warmly until the time of use. Tank water heaters have a low initial cost but can incur high energy costs in the long run.
On the other hand, tankless water heaters call for higher initial investments and lower ongoing energy costs. This is because this model heats water only when needed. Tankless water heaters are more compact and do not store water. If you are blurred about the types and varieties, check www.samedayhotwaterservice.com.au for different types of hot water units.
used with permission from AGK Design Studio
Energy Efficiency
Hot water systems are the third-largest energy consumer in any home, no matter what fuel source it uses. When you are looking for a hot water system, check for the energy star symbol. This is an easy way to know that the water heater will save energy along with high-quality performance and efficiency.
If you are getting an oil-fired or gas-fired hot water system, you have to consider the energy factor. The energy factor indicates the efficiency of the water heater for all the models. The water heater will be more efficient if the energy factor is high.
Location And Space
You have to choose a hot water system which will fit into the existing space in your house. With the increase in insulation and improvements in energy efficiency, the newer models of hot water systems are larger than older models.
If you are fine with taking up the extra costs for accommodating a larger water heater, make sure that you find a good local professional to help you with the renovations.
used with permission from AGK Design Studio
Capacity Of The Hot Water System
Capacity does not just mean how much water the tank can hold, it also means how quickly it can heat the water. The factors that affect a tank’s storage capacity are the size of your home, the number of people who live there, and their water usage.
You should also consider the number of bathrooms, appliances that use hot water, and how often they will run simultaneously. If your house has just one bathroom, you will need a heater with 30 to 40 gallons capacity.
To enjoy a soothing hot shower, you should not hesitate to spend some time researching the right hot water system. Thanks to Same Day Hot Water Service for consulting
